2024-01-03
The forklift manufacturing industry is located in the world's largest and most promising market and has certain development potential. At the same time, a series of derived industries such as the forklift maintenance industry have become indispensable new industries nowadays. Then maintenance ca
CLICK MORE
2023-12-27
Timers on forklift dashboards are used to record operating hours, operating hours, or other time-related information. Converting these time units may vary between different forklift models and dashboard designs. Typically, you'll need to consult your forklift's manual or
CLICK MORE
2023-12-25
1. Circuit failure(1)Circuit board failure: When the circuit board is damaged, the buttons cannot be used or the solenoid valve cannot work properly. The solution is to replace the circuit board.(2)Insufficient battery power: The forklift's wires are used with the battery. If the battery power i
CLICK MORE
2023-12-21
Ⅰ. Various methods for forklift stallingWhen you need to shut down the forklift, you can take the following methods:1. Turn off the ignition switch: This is the most direct method. Turn the ignition switch to the "OFF" position to turn off the engine.2. Turn off the engine by powering off
CLICK MORE
2023-12-20
Ⅰ.Forklift Safety Operation Manual: The operation of the electric forklift driver must comply with the requirements of safety regulations.1.Before operation, check the effectiveness of the braking system and whether the battery power is sufficient. If any defects are found, correct them before oper
CLICK MORE
2023-12-01
The risk level of forklifts is level 5, from low to high, they are A1 (cautious type), A2 (stable type), A3 (balanced type), A4 (aggressive type), and A5 (aggressive type).Basic risk conditions for forklifts:1. The examination for the forklift certificate for special equipment operators requires the
CLICK MORE
2023-11-30
Manual hydraulic forklift is a type of forklift that we often use in our work and daily life. During our use, many problems have arisen due to improper operation or maintenance. Today, TOOMOTOO will explain the reasons why manual hydraulic forklifts cannot be lifted:1.The wear gap between the valve
CLICK MORE
2023-11-29
Ⅰ.Requirements for driving forkliftsForklift operation positions should designate operators who must hold a forklift operation certificate issued by the Quality Supervision Bureau. Safety training must be conducted before entry. Before starting work, one should fasten their seat belt, wear appropri
CLICK MORE
LINKS:
Harber Metal
+86 022-88130099
+86 18522178157
info@toomotoo.com 
+86 022-88130099
+86 18522178157
info@toomotoo.com
