NOBLIFT electric forklift fault code query

Time: 2023-11-20

Source: TOOMOTOO

Author: TOOMOTOO

Click: 220 times

I. Motor Fault Codes

1, Code E0 - The system has not detected normal motor operation.

Cause: This may be caused by a closed motor bearing or a damaged motor fan.

Solution: Open the motor and check the bearings or replace the motor fan.

2, Code E1 - Motor temperature is too high.

Cause: This may be caused by high ambient temperature or internal motor failure.

Solution: Place the motor in a well-ventilated area to reduce its temperature and replace the motor if the problem persists.

3, Code E2 - Motor output fault.

Cause: This may be caused by a fault in the motor itself or poor motor wiring.

Solution: Check that the motor is wired correctly and replace the motor if necessary.


NOBLIFT electric forklift truck fault code

II. Controller Fault Codes

1, Code F1 - Controller zero calibration fault.

CAUSE: This may be caused by a controller misconfiguration or internal controller failure.

Solution: Contact your dealer or replace the controller.

2, Code F2 - Controller EEPROM error.

Cause: This may be caused by a controller configuration error or internal controller failure.

Solution: Contact your dealer or replace the controller.

3, Code F3 - Controller CAN communication failure.

Cause: This may be caused by an internal failure of the controller or abnormal communication between the controller and other components.

Solution: Check the connections between the controller and other components and replace the controller if necessary.


NOBLIFT Forklift Truck Fault Codes


III. Sensor Fault Codes

1, Code S1 - Sensor Abnormal.

Cause: This may be caused by a fault in the sensor itself or a poor sensor connection.

Solution: Check if the connection between the sensor and the controller is stable and replace the sensor if necessary.

2, Code S2 - Sensor is not detecting a signal.

Cause: This may be caused by a sensor not connected or a faulty sensor.

Solution: Check whether the connection between the sensor and the controller is stable and replace the sensor if necessary.

The above is the common fault code of NOBLIFT electric forklift and its solution, I hope this article is helpful to you. If you need to buy NOBLIFT forklift related accessories, you can contact TOOMOTOO.

Tags: NOBLIFT Forklift 

<< Previous page

Next page >>

tel icon +86 022-88130099 whatsapp icon +86 15522164401 maile icon info@toomotoo.com